Selection of device version V2 NAND
Current Firmware-SET for LAN module 8029HEPTA/M00 of the Basic Clock System 8029HEPTA-V2/GPS NAND:
Upgrade from Firmware Version 07.xx
Upgrading from SET 07.xx to the current firmware SET version 08.02 is not directly possible. First of all, you have to upgrade from SET 07.xx to SET 08.01 via USB stick. Only then a WebUpdate can be performed from SET 08.01 to SET 08.02!
- Readme
Step 1:
- 8029HEPTA-V2/GPS NAND SET 08.01 (USB)
- Checksum MD5 / SHA256
- 8029HEPTA-V2/GPS NAND SET 08.02 (WEB)
- Checksum MD5 / SHA256
Step 2:
Upgrade from Firmware Version 08.01
Upgrading from SET 08.01 to the current firmware set version 08.02 is directly possible via WebUpdate.
Only one step is required!
- Readme
- 8029HEPTA-V2/GPS NAND SET 08.02 (WEB)
- Checksum MD5 / SHA256
ATTENTION!
When carrying out the firmware update please note the description contained in the firmware package!
When carrying out the firmware update please note the description contained in the firmware package!
ATTENTION!
This firmware set is ONLY SUITABLE for LAN module 8029HEPTA/M00 of the basic clock system 8029HEPTA! If the device consists of additional LAN modules (e.g. 8029NTS/M), the firmware for these modules is separately available under the product name of the additional LAN module!
This firmware set is ONLY SUITABLE for LAN module 8029HEPTA/M00 of the basic clock system 8029HEPTA! If the device consists of additional LAN modules (e.g. 8029NTS/M), the firmware for these modules is separately available under the product name of the additional LAN module!
ATTENTION!
Do not install a different firmware version than the version above! An incorrect update or an incorrect update trial may require to send the device to hopf Elektronik GmbH for a fee-based repair.
Do not install a different firmware version than the version above! An incorrect update or an incorrect update trial may require to send the device to hopf Elektronik GmbH for a fee-based repair.