Newsletter · Contact · Deutsch

Because every fraction of a second counts 

hopf Logo

Time Server 8029NTS for DIN Rail mounting – compact and highly flexible at the same time

Short Description

On purchase you decide on

  • which additional signal output modules (incl. physical signal output and plug-in connection) you optionally want to have integrated in your system:
    • 1 independent NTP time server is integrated in your system by default
    • you can specify on purchase if you need an extension slot to be equipped with an additional independent NTP time server or with the following optional signal output modules:
      • IRIG-B (analogue / digital)
      • DCF77 pulse
      • cyclic pulses
    • the external time synchronization source:
      • GPS (immediately available)
      • IRIG-B (on demand)
    • which kind of power supply you require:
      • 100-240V AC
      • 110-250V DC
      • 24V DC
      • 48V DC
    • which type of crystal to be integrated in the application:
      • standard crystal
      • VCTCXO crystal

Start assembling your individual 8029NTS right now with our hopf FG8029NTS configurator!

 

TIP: To achieve the best performance of the configurator, please activate the macros after opening the file. This file was checked regarding macro security and is free of any viruses!

Features

The completely maintenance-free and highly-precise network time server for DIN Rail mounting is the ideal synchronization solution of networks and industrial applications.

  • 1 independent NTP time server is integrated by default; on request your system can be equipped with 1 additional independent NTP time server or with the following signal output modules
    • IRIG-B (analogue / digital)
    • DCF77 pulse
    • cyclic pulses
  • simple, complete and safe operation and parameterisation (password protection and activatable https protocol) via a password-protected WebGUI (optional SSH/Telnet)
  • current status bar easily available via WebGUI
  • important information for implementing and about operating status available via status-LEDs at the front panel (if WebGUI-access is not available)
  • improved security ensured by
    • symmetric keys
    • access restriction
    • autokey
    • deactivation of non-used network protocols
  • SyncOFF Timer (reception failure bypassing) for accurate operation even based on difficult reception conditions
  • synchronization status output via optical coupler
  • GPS antenna circuit with potential isolation and antenna circuit control (supervision if antenna input is open or short-circuited)
  • By GPS time synchronization and the worldwide used time protocol NTP the time server 8029NTS turns into a highly accurate NTP Stratum 1 time server
  • synchronization of IEC 61850 compatible devices via NTP/SNTP
  • closed aluminium profile housing for easy and horizontal DIN Rail mounting according to DIN EN 60715 TH35
  • automatic switch-over of summer/winter time
  • high freewheel accuracy provided by GPS supported regulation of the internal quartz basis
  • redundant multiple validation of the synchronization signal for an error-free and leap-free signal evaluation
  • maintenance-free, buffered backup clock for at least three days
  • automatic handling of the leap second

Pictures

8029NTS
8029NTS 8029NTS 8029NTS
8029NTS 8029NTS

Downloads

PDF documents

System Configurator

Software and Driver

Firmware and Software-SET's