Selection of device version NAND
Current Firmware-SET for Board 7273(RC) NAND:
Upgrade from Firmware Version 07.xx
Upgrading from SET 07.xx to the current firmware SET version 08.03 is not directly possible. First of all, you have to upgrade from SET 07.xx to SET 08.01 via USB stick. Only then a WebUpdate can be performed from SET 08.01 to SET 08.03!
- Readme
Step 1:
- 7273(RC) NAND SET 08.01 (USB)
- Checksum MD5 / SHA256
- 7273(RC) NAND SET 08.03 (WEB)
- Checksum MD5 / SHA256
Step 2:
Upgrade from Firmware Version 08.xx
Upgrading from SET 08.xx to the current firmware set version 08.03 is directly possible via WebUpdate.
Only one step is required!
- Readme
- 7273(RC) NAND SET 08.03 (WEB)
- Checksum MD5 / SHA256
ATTENTION!
When carrying out the firmware update please note the description contained in the firmware package!
When carrying out the firmware update please note the description contained in the firmware package!
ATTENTION!
Do not install a different firmware version than the version above! An incorrect update or an incorrect update trial may require to send the board to hopf Elektronik GmbH for a fee-based repair.
Do not install a different firmware version than the version above! An incorrect update or an incorrect update trial may require to send the board to hopf Elektronik GmbH for a fee-based repair.