Newsletter · Contact · Deutsch

Because every fraction of a second counts 

Clock System 7001(RC)

Short Description

System 7001(RC)-GPS is a modular system with integrated GPS receiver.

Basically it consists of the following components:

  • GPS radio controlled base system 7001(RC)-GPS consisting of
    • 19" rack (3U/84HP) for mounting into cabinets
    • Clock board 7020RC-GPS with GPS receiver
    • Display and keypad
    • Power supply
    • Max. 15 slots (3U/4HP) for implementation of function boards
    • Prepared extension slot for LAN Management Board 7050RC

The base system 7001(RC)-GPS is equipped with function boards for the output of required signals according to the provided customer specifications. The possible number of functions boards to be integrated and upgraded is primarily determined by the number of available slots in 19" rack and the power supply capacity.

System 7001(RC)-DCF is a modular system with integrated DCF77 receiver board.

Basically it consists of the following components:

  • DCF77 radio controlled base system 7001(RC)-DCF consisting of
    • 19" rack (3U/84HP) for mounting into cabinets
    • Clock board 7020RC and DCF77 receiver board
    • Display and keypad
    • Power supply
    • Max. 14 slots (3U/4HP) for implementation of function boards
    • Prepared extension slot for LAN Management Board 7050RC

NTP Stratum 1 Time Server

By implementation of NTP LAN Board(s) 7273 or NTP LAN Board(s) 7274 System 7001(RC) becomes a highly accurate NTP Stratum 1 Time Server for synchronization of computers and industrial networks.

Features

GPS version

  • GPS System to be modularly equipped with function boards
  • High availability based on hot-plug capability:
    • Removal and installation of function boards during operation
    • Failure of single function boards do not influence the functions of the other boards
  • Channels for parameterization/monitoring:
    • Keypad and operating menu via display
    • Serial connection via the hmc (hopf Management Console)
    • WEB-GUI and SNMP for function boards with LAN interface
    • Option: LAN connection via the hmc including monitoring via SNMP
  • Subsequent extension by additional function boards
  • Error-Management to be parameterised
  • Potential isolation of the GPS antenna circuit
  • Synchronisation with just one satellite possible
  • SyncOFF Timer (bridging of reception failure) providing an error-free operation even under difficult reception conditions
  • Redundant multiple test mechanism of the synchronisation signal providing a correct and leap-free signal evaluation
  • High free running accuracy
  • Maintenance-free back-up clock for three days
  • System completely maintenance-free
  • Options:
    • Power supplies for various operating voltages
    • Multi source functionality:
      Synchronisation via an additional signal input with automatic switch-over between GPS and the second synchronization source
    • Supply in 6U (6U/84HP) or 9U (9U/84HP) rack for implementation of more function boards and/or more extensions slots
    • Redundant power supplies
    • OCXO crystal basis for increased free running accuracy
    • Status LEDs in the front panel
    • Extension by a Switch-Box (System 5000) for automatic switch-over of signals between two systems (Master Clock and redundant Master Clock)
  • Specific hardware and software customizations

DCF77 version

  • DCF77 System to be modularly equipped with function boards
  • High availability based on hot-plug capability:
    • Removal and installation of function boards during operation
    • Failure of single function boards do not influence the functions of the other boards
  • Channels for parameterization/monitoring:
    • Keypad and operating menu via display
    • Serial connection via the hmc (hopf Management Console)
    • WEB-GUI and SNMP for function boards with LAN interface
    • Option: LAN connection via the hmc including monitoring via SNMP
  • Subsequent extension by additional function boards
  • Error-Management to be parameterised
  • Potential isolation of the DCF77 antenna circuit
  • SyncOFF Timer (bridging of reception failure) providing an error-free operation even under difficult reception conditions
  • Redundant multiple test mechanism of the synchronisation signal providing a correct and leap-free signal evaluation
  • High free running accuracy
  • Maintenance-free back-up clock for three days
  • System completely maintenance-free
  • Options:
    • Power supplies for various operating voltages
    • Multi source functionality:
      Synchronisation via an additional signal input with automatic switch-over between DCF77 and the second synchronization source
    • Supply in 6U (6U/84HP) or 9U (9U/84HP) rack for implementation of more function boards and/or more extensions slots
    • Redundant power supplies
    • OCXO crystal basis for increased free running accuracy
    • Status LEDs in the front panel
    • Extension by a Switch-Box (System 5000) for automatic switch-over of signals between two systems (Master Clock and redundant Master Clock)
  • Specific hardware and software customizations

Erweiterungen

The base system 7001(RC) is equipped with function boards for the output of required signals according to the provided customer specifications. The possible number of functions boards to be integrated and upgraded is primarily determined by the number of available slots in 19" rack and the power supply capacity.

Please note:

  • Number of function board + RC: only available for system 7001RC
  • Number of function board + (RC): available for system 7001 as well as system 7001RC
  • Number of function board without any further marking: only available for system 7001

Function Boards for System Bus

Function Boards

Synchronisation Boards and Modules

Management Boards

Pictures

System 7001RC System 7001RC System 7001RC System 7001RC

Downloads

PDF documents

Software and Driver