Newsletter · Contact · Deutsch

Because every fraction of a second counts 

DCF77 Power Splitter 4446, 4-port, active (230V AC)

Short Description

If several DCF77-clocks are wanted in the building the 4x antenna amplifier with potential separation can be used. The device is structured like the antenna amplifier FG444400, but without indirect lightning protection.

The housing contains the mains unit and several amplifier modules.

The signal is fed via a pre-amplifier to 4 potential free output steps and put out via insulated BNC-connectors on the wider side of the housing.

Technical Data

multi aerial amplifier without indirect lightning protection 4446
housing type: aluminium-die-cast-housing
dimensions (W x H x D): 250 x 105 x 95 mm
weight: approx. 3.5 kg
earth connection point
thickness of the copper stranded wire: min. 10 mm²
length of the copper stranded wire: max. 10 m
power supply: 230V AC ± 10%
power consumption: 6 VA max.
fuse: thermal cutout
input / output: BNC connector (female/female)
input / output impedance: 50 Ω
cable length antenna – antenna amplifier: max. 500 m
cable length antenna amplifier - clock: max. 500 m
amplification: 0 to 3 dB
temperature range
operation: -20° C to +80° C
storage: -40° C to +85° C
humidity: 95% non-condensing
protection class: IP40

Pictures

Power Splitter

Downloads

PDF documents

Software and Driver

  • For this product there is no Software / Driver available.