GPS Antenna Cable

Antenna Cable KA110109

Change of GPS Antenna Cable from May 2001

Previous Configuration:

• Standard cable RG59 with one line-amplifier up to max. 100 m (328.0 ft)
• hopf GPS special cable KA110107 with one line-amplifier up to max. 150 m (492.0 ft), without line-amplifier: max. 70 m (229.6 ft)

New Configuration:

• Standard cable RG59, supplied on a coil KA4017, up to max. 25 m (82.0 ft).
• hopf low loss LSZH* cable KA110109 with two line-amplifiers up to max. 325 m (1,066.0 ft), 
  without line-amplifier up to max. 100 m (328.0 ft) (* low smoke zero halogen)

hopf low loss LSZH cable KA110109 replaces hopf GPS special cable KA110107. The BNC connectors ST001106 used for hopf GPS special cable KA110107 are also suitable for the hopf low loss LSZH cable KA110109. The combination of different cable types within one antenna configuration is not possible. The cable KA110109 can also be used for DCF77 antenna configurations.

Advantages of the New Cable KA110109

1. Based on the low attenuation oft the cable GPS antenna cable length up to max. 325 m (1,066.0 ft) (for operation with 2 line-amplifiers) are possible
2. Characteristics of the cable low smoke and zero halogen (LSZH: low smoke zero halogen)

Cable Lengths:

Antenna configuration for max.	PDF	File Size
hopf low loss LSZH without line amplifier 6849	max. 100m (328 ft)	16kB
hopf low loss LSZH cable with one line amplifier 6849	max. 200m (656 ft)	16kB
hopf low loss LSZH cable with two line amplifiers 6849	max. 325m (1066 ft)	16kB
Cable info and Data sheet KA110109	english	450kB
	german	450kB

 

Two line-amplifiers at the most can be used.

Cable length up to max. 25 m (82.0 ft):	Use of standard cable ring KA4017.
Cable length over 25 m (82.0 ft):	Use of hopf low loss LSZH cable KA110109.

Referring to antenna configurations differing from the configurations shown in the attached drawings a clarification based on the required cable lengths is required.

Prices and technical data are subject to change without notice