GPS-System 6842

hopf Elektronik GmbH

Ranges of Application

The model 6842 is an euroboard with display and key-pad. These boards can be used worldwide to synchronize computer systems and controls. The unit is synchronized by the satellite navigation system GPS which guarantees the worldwide distribution of precise time, frequency and position.

System Versions

Model 6842G10 GPS plug-in board 100 x 160 mm, with LCD-display and key-pad, board width 20TE, completely configurable over the key-pad.

Models 6842Gx1,...x2,...x3: "Stand-alone Systems" consisting of:

 

We can optionally offer a standard frequency-package unit for model 6842. The TTL frequency output is 100 Hz to 10 MHz adjustable in steps of 1 Hz. The sine frequency of 100-2000 Hz at the output is precisely synchronized to the PPS pulse. Due to the adjusting control of the TCXO during satellite reception a short time accuracy of 1 x 10-9 (100 sec) and a long time accuracy of 1 x 10 -11 (1 month) can be reached.

Internal BUS Interface

Up to two of the following boards can be connected to the internal bus interface.

 



Technical Data

General
Euroboard with key-pad: 3 U / 20 HP
Voltage supply for the board: + 5 V DC ± 5 %
Voltage supply for the system: 230 V AC + 10% - 15%
120 V AC + 10% - 15%
Optional for the system: 110 V DC (60 V - 120 V)
60 V DC (38 V - 75 V)
24 V DC (18 V - 36 V)
Temperature range: 0 - 50°C for the specified data
0 - 70°C with reduced free-running characteristics
MTBF: appr. 150,000 h
 
Receiver (8 channel C / A code receiver)
Sensitivity: -134 dBm lock-sensitivity
-143 dBm pull-out-sensitivity
 
Accuracy:
PPS pulse: ± 300 nsec.
VCO control: ± 0.1 ppm after 0.5 hours of continuous GPS reception
Free-running properties: ± 0.1 ppm after VCO control at a constant temperature between + 10°C and + 50°C
Back-up clock: ± 25 ppm from +10°C to +50°C
 
Interfaces
  • 2 independent serial interfaces with RS232 / RS422-hardware 
    with handshake lines RTS / CTS
  • DCF77 simulation 77.5 kHz
  • 1 PPS pulse TTL-level
  • 1 kHz pulse TTL-level
  • Bus interface s. backside
 
Serial interface parameter
Baud rates: 150 - 19,200 baud
Stopbit: 1 bit / 2 bit
Word length: 7 bit / 8 bit
Parity: no, even or odd
 
Additional components see GPS accessories

 


Download Manuals / Software

Current manuals in english and german language and preconfigured NTP-Packages can be found in the download area:

 


homepage

+++ selection+++

top

© by hopf Elektronik GmbH  -  Nottebohmstr. 41  -   D-58511 Lüdenscheid  -  E-Mail: support@hopf.com