GPS-system 6841

"Stand-alone-System" The picture on the right shows the plug-in board 6841 with the following technical specifications.

As standard the device will be delivered with 2 independent interfaces RS232 and RS422 on a female SUB-D connector.

System versions

Model FG6841G10
GPS-plug-in board 100 x 160 mm, with display and keypad, board width 20 TE, can be configured completely via the serial interface; an installation program, which runs under MS Windows, is included in the delivery.
Models FG6841G11, ...12, ...13
"Stand-alone-system", consists of:
- the basic board FG6841G10
- mains unit 230 V / 120 V AC, power line filter
- interface-transfer at 9-pol. and 25 pol. SUB-D connectors
- types of housing: ½ 19" module rack (11), wall- (12) or table-top housing (13)

The option antenna simulator (FG731700) can supply 4 other DCF77-radio controlled clocks with the antenna signal.

Receiver:	see GPS-Info
Parameter:	Baudrate, stop bit, parity, structure of data string etc. can be set via keypad or the serial interfaces
Interfaces:	2 independent serial interfaces with RS232- and RS422-hardware incl. handshake-lines RTS/CTS, DCF77-simulation 77.5 kHz, 1 pps-pulse TTL-level, 1 kHz-pulses TTL-level

Initialising files for the driver software by Microsoft (on the Windows NT Resource Kit CD)

Manual English/German