DCF77-Clock 6021

The DCF77-radio controlled clock 6021 is designed as euroboard (width of board 4 HP) and has 1 serial interface with RS232-, RS422- and TTY-hardware built in. At the 64 pole VG-connector the various serial interfaces can be taken and the supply voltage (+5 V DC) can be supplied here. The following additional I/O Signals are available:

• three output relays (24 V / 20 mA) with different pulse programs
• two potential free pulse entries (for special programs)
• connection facilities for hopf slave displays
• connection facilities for hopf slave clocks
• Option: Version 6022 with optical fibre for the data string output

System versions of the radio board 6021:

• Modell FG602100
  DCF77-radio board 100 x 160 mm, without display, board width 4 HP (see picture)

• Modell FG602101
  DCF77-radio board with 7 mm LED-display, board width 16 HP

If it is not possible to install the device into an existing system, the modules of the system 6000 can also be structured as "stand-alone-systems".

"Stand-alone-Systeme"consists of:

• the basic board FG602100
• mains unit 230 V / 120 V AC, power line filter, power line switch
• interface-transfer at 9-pol. and 25-pol. SUB-D connectors
• types of housing wall-, table-top or 19" module rack

FG602105 radio board built in ½ 19" wall housing

FG602104 radio board with LED-display built in a ½ 19" module rack

FG602107 radio board with LED-display built in a ½ 19" table housing

FG602109 radio board with LED-display built in a 19" module rack

Technical Data

Extras/Options

• FG550801 LED slave displays with 13 mm hight of digits
• FG6022X  how all models 6021, with plastic fibre
• FG6023X  how all models 6021, with optical fibre
• FG940100 board with separate potential antenna-circuit

Download Manuals / Software

Current manuals in english and german language and preconfigured NTP-Packages can be found in the download area:

• German Manuals
• English Manuals
• Preconfigured NTP-Packages